LB180
- Home
- LB300-System
- LB300-Boards
- LB180
LB180
The LB180 is used to interconnect the LB302/3 with external signal generators (e.g. D/A-converter, waveform generator, K-Line, resistor decade…). There are 6 single-ended, 3 potential-free, or every combination of generators connectable. They can be switched through a relay matrix to the LC-bus (Low-Curent-bus). From there the signals can be connected to the LB990 input cards, which are also wired to the DUT (Device-Under-Test). All relays on the card are interlocked to prevent shortcuts if there are software errors. The 18 LEDs on the front show the currently used LC-bus channels and inputs/outputs of the card.
Bus | d|bus |
---|---|
Inputs | 6: min. 10 µA to 3,5 A |
Outputs | 3: min. 10 µA to 3,5 A |
Display | 3 x 6 LEDs |
Relay | NO (Normally Open) |
Format | Euroboard format (100 mm x 160 mm), 3U/4HP |