ISCM Infineon TLE4999C (C26ab70e)

ISCM Infineon TLE4999C (C26ab70e)

The CompactRIO module ā€œIntelligent Sensor Calibration Moduleā€ (C26) developed by CGS can program and calibrate up to 2 Infineon TLE4999C sensors. In addition, the module can read the data via SENT / SPC on channel 1 and 2 in parallel. This is also possible if the sensors output their data via different protocols, or if 1 channel is in programming mode and the other is decoding SENT. e.g. sensor 1 performs programming and sensor 2 performs SENT decoding .

The computing power for the complex programming routine and SENT/SPC decoding is provided by an FPGA installed in the module. The FPGA of the CompactRIO chassis is only used for communication with the CGS module. This allows up to 8 intelligent modules per chassis to be operated. The module is available for calibrating different sensors from several manufacturers. A list of supported sensors can be sent on request. The ISCM supports the SENT standards SAE J2716. The sensors are powered thru the cRIO module, connected to an external power supply (10-36 V, not included).

Communication

LabVIEW VI

Inputs

Up to 2 Channels (SENT/SPC)

Outputs

Up to 2 Channels (Infineon SICI Protocol)

Bus

CompactRIO

Format

CompactRIO Single Module

Sensor Manufacturer

Infineon

Supported Sensors

TLE4999C

Product Number

a = 1; 1 Channels (1 sensor)
a = 2; 2 Channels (2 sensors)
b = 1; SENT
e = 0; SPC (NO)
e = 1; SPC (YES)